Over the last couple of years, I have purchased a mag drill, compound miter saw, chop saw, and two circular saws. Overall am very pleased with the products. I live in Japan and have been ordering Evolution products from both the UK and America. The freight forwarding adds a bit of a delay, but the time it took from when I placed the order to delivery to the freight forwarder has always been on time. I am not too impressed with the folding stand for the miter saw, however. It does not seem to lock in the saw very well and have been trying to come up with some sort of easy-to-manage modification. The chop saw blade guard mechanism fell apart but the application of Locktite upon re-assembly remedied that issue. I have been cutting steel with the same blade for well over a year and a half. I would have easily gone through well over 50 abrasive wheel blades for the amount of cutting I have done. Mostly 2.5 to 5 mm steel pipe and angle. Be cautioned that when cutting small pieces of steel, the piece tends to kick out and become a projectile. The cast tab, behind the blade which helps guide the metal chips into the collector bin, broke off as a result of one such incident. The mag drill I have been equally impressed. My 12mm cutter and center pin did however shatter after scores of holes were cut, which was probably due to the backing of the steel bar I was drilling at the time. I set up a makeshift drill press on a piece of 20mm steel plate to fabricate dozens of identical brackets. Overall, my experience with the products has been beyond fantastic and well worth the investment. I have absolutely no regrets!