Evolution Power Tools Reviews

4.6 Rating 11,492 Reviews

94 %

of reviewers recommend Evolution Power Tools

4.6

Based on 11,492 reviews

Shipping & Delivery
Delivery Methods	Courier
Average Delivery Time	Within 5 Days
On-time Delivery	99%
Accurate And Undamaged Orders	Greater than 91%
Customer Service
Communication Channels	Email, Telephone

About Evolution Power Tools:

Evolution Power Tools. Pioneers of multipurpose cutting technology.

Visit Website

Phone:

+441142511022

Email:

sales@evolutionpowertools.com

Location:

Venture One Business Park, Longacre Close, Holbrook,
Venture One Business Park, Longacre Close, Holbrook
Sheffield
S20 3FR

Write Your review

Tell us how Evolution Power Tools made you happy

Help future customers by talking about customer service, price, delivery, returns & refunds.

Minimum 10 characters

Would you like to add a photos or videos?

Strengthen your review by uploading photos & videos.

Drag files here or browse

(Supported files: jpg, png, mpeg, ogg, mp4 & webm)

What's your name?

Leave this blank if you'd like to publish your review anonymously.

(Optional)

Whats your email?

We need your email address to verify that your review is genuine

Please note that we may share your email with the company to verify your order.

Evolution Power Tools 5 star review on 4th July 2026

526

Anonymous

Anonymous // 01/01/2019

Filter: Rated 2 None 5 Stars 4 Stars 3 Stars 2 Stars 1 Stars Helpful Language: Any Any

English

“Your website to register my saw was a disaster...every time I tried to enter MY OWN INFOMATION it sent a message over the top trying to "2nd guess" what I wanted to print, eg addresses in LONDON when I put in my road name etc. his was infuriating & made the whole process a nightmare. After I inserted the CORRECT house number it changed my number to 14 instead of 48Millway causing me to have to start the process all over again. It now seems I'm registered TWICE. once with the wrong number & once with the CORRECT one!! Sort this out please!!!”

Helpful Report

Posted 10 years ago

“The slide saw itself seems to be satisfactory. Most companies have a shortened set up leaflet, this one doesn't. When setting up the saw, a necessary locking bolt was not clearly mentioned in the manual. Sent an e mail 4 days ago, still waiting for a response. sorted it out myself. See how long before I get a response after this review!!”

Helpful Report

Posted 10 years ago

“The saw rage 3 seems to work great so far & the setup video online was a great idea. Sadly I bought my saw from Screwfix who had a video stating the saw came with a dust bag which, after opening the box, I found was not included. After complaining to Screwfix a few times I was told they don't sell the dust bag & refused to help anymore even though it was their company review video that stated the product came with the dust collection bag.”

Helpful Report

Posted 10 years ago

“I have just purchased an Evolution RAGE3FP2551 255mm Compound Mitre Saw, and have used it extensively for the last 5 weeks. I have given the rating as "poor" because of the inaccuracy of the saw. The slots for the angle of the table are not accurate, I had to file the slot on mine at 90 Degrees, and 15 Degrees. The bevel scale is also inaccurate. This means that every time I need a bevel or mitre, I have to reset the saw at 90 Deg. With a square, this is time consuming. The saw is very powerful, and easily cuts the largest acceptable timber, but the inaccuracy lets it down. You are better off spending a little more on a DeWalt or Makita saw if you require the accuracy. Overall not up to the normal Evolution standards. Dr. Wilson”

Helpful Report

Posted 10 years ago

“bought this 7 weeks ago, only started to use it 3 weeks ago, and then it stopped working, it has been returned back for repair or replacement, un acceptable, for a new item.”

Helpful Report

Posted 10 years ago

“Used for about a month and a half before motor developed a fault..not very impressed, also noticed hand part on body of unit gets very hot and only able to run unit for about five minutes at a time before having to switch off for 20 minutes to cool down.”

Helpful Report

Posted 10 years ago

“I must say that I am rather concerned at the quality of this product. I bought it somewhat on the British Innovation but on assembling noted the made in PRC label which seems to confirm my concerns. I accept that items made in China can be as good as anywhere, it is all dependent on the quality control but the finish on the product makes me question the QC. The paint which is powder coat (good) is very poorly applied, there is either contamination or corrosion under the panels (legs and side supports). The metal is very thin. Assembly is a challenge, long winded and I would expect spring washers rather than, or as well as flat washers to be used considering the constant vibration the machine will operate under. There is a small grub screw in the mitre setting assembly for which there is no allen key supplied and the spanners supplied would not aid assembly at all. I would not expect spanners to be supplied but the manual should specify the assembly tools required. The manual itself is poorly printed, almost a poor photocopy and I had to download the pdf version to aid assembly as well as identify the broken part. In the original as well as the replacement mitre assembly the pivot pin that is a push fit in the mitre angle block had not been inserted far enough into the casting and was binding on the table (actually scoring the aluminium). Whilst this was easily remedied through the judicial use of a vice not all your customers will have access to a vice or the mechanical knowledge to resolve this. The mitre slide itself is a very poor fit in the guide and can give a variation of a couple of degrees when sliding the mitre assembly through the blade, this obviously affects the quality of any joints being prepared through the use of the mitre. In use (very little so far, as long as check and ajustments to compensate for the fits the saw seems to perform adequately. I would appreciate your technical department's comments on the above items.”

Helpful Report

Posted 10 years ago

“Had a mitre saw since August 26 2014 motor started to burn out had to buy new motor, The company was not interested in repair as it was 2 months out of guarantee. Only wanted me to buy a new one”

Helpful Report

Posted 10 years ago

“Product was faulty with a safety issue, so no pints there. Good quick response and product was replaced by screwfix without issue.”

Helpful Report

Posted 10 years ago

“Works ok but the laser has stopped working after a few days what next ???”

Helpful Report

Posted 10 years ago

“The machine was supplied with 4 sanding belts but no information on the coarseness or otherwise of the belts, the one attached to the machine was 80 which I later found to be medium however it literally gouged the surface of the door I was sanding making a real mess. That is why I have given it a low rating.”

Helpful Report

Posted 11 years ago

“Lugs did'nt line up with cutting head”

Helpful Report

Posted 11 years ago

“boxes wouldn't line up with question options so you had to guess what info to fill in which option box”

Helpful Report

Posted 11 years ago

“On the third cut of using the saw the blade came loose and spun into the gaurd (good job it had a decent gaurd otherwise it would have done some injury to me ) and now feel it has compromised the blade and the saw motor does not sound the same ???????????????? not impressed”

Helpful Report

Posted 11 years ago

“Innovative tools at very good prices - cheap prices. Noisy, cheap motors and gearing. The saying "you get what you pay for" really does describe it best. Amateurs and diy enthusiasts may be pleased with the features but professional tradesmen should avoid to avoid disappointment.”

Helpful Report

Posted 11 years ago

“My saw was barely used but broke anyways.”

Helpful Report

Posted 11 years ago

“30 degree cut is actually 60 degree with 120 degree offcut. machine will not cut angles below 45 degrees which is extremely limiting. Not much use to me, you should make the limitations clear”

Helpful Report

Posted 11 years ago

“Its an OK table saw, but after checking with a square if the blade is at 90' when the guide says so, it's not. The fence is not square to the blade and needs adjustment with a tape. I don't think its worth the £300 + that I payed for it and I will probably sell it on for a loss and buy another make after checking the market for what is better. Maybe you should try using them before selling them.”

Helpful Report

Posted 11 years ago

“I bought this saw from Screwfix and after using it for two days a slice of metal fell out of the guard and the guard stopped working which made it unsafe to use. Having said that, when I returned it to the store they replaced it without a problem. While in use the saw cut cleanly though I was using it to cut softwoods about 1 cm thick. It appeared to be made from decent quality materials and sat well on the bench and the cutting stand. Perhaps I just got a poor saw. I will know more when the replacement arrives and I see how long it lasts.”

Helpful Report

Posted 11 years ago

“used rage3s compound mitre saw 4 times just cutting timber, was disappointed has it burnt out. took it back to screw fix and they replaced it. If the replacement lasts I might change my rating of Evolution tools. The only tool I can say is good is the mitre stand.”

Helpful Report

Posted 11 years ago

Evolution Power Tools is rated 4.6 based on 11,492 reviews